APC SRTG10KXLI Smart UPS 10kVA
| Two post mountable | 0 | 
|---|---|
| USB compatible | Yes | 
| Mounting position | Horizontal | 
| Network frequency | 40…70 Hz auto-sensing | 
|---|---|
| Number of input connectors | 1 hard wire 3-wire (1P + N + E) | 
| Input voltage limits | 160…285 V full load | 
| Maximum input current | 30 A | 
| Max short time withstand current | 40 kA | 
| Maximum configurable power in VA | 10000 VA | 
|---|---|
| Maximum configurable power in W | 10000 W | 
| Output frequency | 50/60 Hz +/- 4 Hz sync to mains | 
| Wave type | Sine wave | 
| Efficiency | 93.5 % | 
| Harmonic distortion | Less than 2 % | 
| Crest factor | 3 : 1 | 
| Bypass type | Internal bypass (automatic and manual) | 
| Additional information | Configurable for 220 : 230 or 240 nominal output voltage | 
| Product certifications | CE UKCA TISI | 
|---|---|
| Standards | EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018 | 
| Ambient air temperature for operation | 0…40 °C | 
|---|---|
| Relative humidity | 0…95 % non-condensing | 
| Operating altitude | 0…3000 m | 
| ambient air temperature for storage | -15…45 °C | 
| Storage Relative Humidity | 0…95 % non-condensing | 
| Storage altitude | 0…15000 m | 
| Acoustic level | 55 dBA | 
| Heat dissipation | 2217.98 Btu/h | 
| IP degree of protection | IP20 | 
| Preinstalled device | Network management card 3 with environmental monitoring | 
|---|---|
| Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm | 
| Emergency power off | Yes | 
| Surge energy rate | 600 J | 
|---|
| Unit Type of Package 1 | PCE | 
|---|---|
| Number of Units in Package 1 | 1 | 
| Package 1 Height | 68.5 cm | 
| Package 1 Width | 59.4 cm | 
| Package 1 Length | 79.4 cm | 
| Package 1 Weight | 124.5 kg | 
 
			 
				 
					 
					 
													 
													 
													 
										 
										 
										 
					 
			 
					 
			 
					 
			 
					 
			 
					 
			 
					 
			 
					 
			 
					
Reviews
There are no reviews yet.